I had a quality cover on my Celica-Supra 2.8 some years ago but it still damage the pipework, it’s the flapping in the wind it beats the paintwork and marks it(and it was securely strapped down) . Also don’t used a cover if you’ve had any recent paintwork done it can cause micro blisters . If you have space the one above makes more sense or just get a half cover to go over the roof area .
Post by charliefarlie on Sept 30, 2020 19:36:37 GMT
I’m about to remove all four brake discs from my MX5...... I replaced them all along with the pads and reconditioned callipers around 16 months ago.
I bought and fitted Pagid as I hoped the unswept area's and the hubs which are painted would not corrode. But it’s just starting to show so off they will come and be painted properly to stop that unsightly rust. They haven’t yet done 700 miles but discs rust up from the moisture in the air ...
My question is is there anything i can coat the disc faces with as the car will sit under the carport till gawd knows when.
I taxed the car only 3 months ago and put it back on SORN yesterday as it won’t get used again till next springtime .
For when the one great scorer comes to mark against your name he marks not that you won or lost but how you played the game.