ajb70
Junior Member
i am old but willing. 2005 plate d4d
Posts: 6
Location: norwich norfolk
Primary Vehicle: rav d4d 2.0
Year: 2005
Engine Capacity: 2.0
Fuel Type: Diesel
Drive Type: 4WD/AWD
|
Post by ajb70 on Feb 14, 2021 11:43:32 GMT
Hi i have taken the turbo off my d4d. it's a 2.0 2005. i noticed the input side vane nut was missing . The vanes are badly damaged. so new turbo ordered. BUT where would the nut possibly go. cleaned the intercooler, no more oil in it, cleaned all pipes, ordered new oil feed pipe. Please can anyone think of where it could have gone. i am a 70 yr old but willing to do anything. have build engines in good old motors i.e crossflow. at a loss with this. Many thanks for any help given. if i can help any one please ask.
|
|
|
|
Post by bigkev on Feb 14, 2021 11:58:43 GMT
Welcome along ajb.......70 and still stripping off......respect. Hopefully some of the folk I have trained on here will come up with an answer to where one of yer nuts has gone. Again, at 70, these things can happen.  |
|
ajb70
Junior Member
i am old but willing. 2005 plate d4d
Posts: 6
Location: norwich norfolk
Primary Vehicle: rav d4d 2.0
Year: 2005
Engine Capacity: 2.0
Fuel Type: Diesel
Drive Type: 4WD/AWD
|
Post by ajb70 on Feb 14, 2021 12:07:54 GMT
cheers bigkev, i hope so as i have been trying to sort this for awhile. i have already spent over £600 trying to do it . but i am a bit worried as to where the nut has gone. Many thanks for reply. Hope all is well and safe at yours.
|
|
|
|
Post by sich1 on Feb 14, 2021 12:09:18 GMT
:welcome:
|
|
|
|
Post by three5 on Feb 14, 2021 13:30:10 GMT
I don't THINK that the nut could actually pass through an open valve. Have you had the inlet manifold off and checked inside the inlet ports?
|
|
